HUBER Screw Conveyor Ro8/Ro8 T

HUBER Screw Conveyor Ro8/Ro8 T is suitable for transport of coarse, fine, and compacted screenings, sludge, grit, and solids from industrial processes. It is transported in a closed tube (Ro8) or in a lidded trough (Ro8 T).

HUBER Screw Conveyor Ro8/Ro8 T

HUBER Screw Conveyor Ro8/Ro8 T

The  HUBER Screw Conveyor Ro8/Ro8 T are installed for horizontal, inclined, and even vertical transport of screenings, dewatered sludge, grit, etc. from wastewater treatment plants, or other solids from industrial processes. They are custom made for individual products to be conveyed. Due to their special design principle, the conveyors can be equipped with either a push or a pull drive. Feed hoppers or discharges can be added if required. Direct screenings transfer from one to the other screw conveyor is no problem.

  • |
  • Installation angle up to 90°
  • The machine is completely made of stainless steel and pickled in an acid bath which eliminates corrosion and thus reduces maintenance
  • Gentle movement in an enclosed pipe prevents odour nuisance and dust development
  • Low maintenance, no lubrication required. Regular checking and visual inspection are sufficient

I would like to receive information about A.T.E. and its products from time to time.Privacy Policy

WordPress Tabs Free Version
WordPress Video Lightbox
Contact Us

Contact Form